On Saturday I finished what I started on the hallway last weekend and finally got some paint up on the walls. First, I had to do a final sanding of the drywall compound on the section that I had drywalled. It can be easy to miss spots when you are only using your eyes so I always rub my hands over everything to make sure I have everything perfectly smooth before I prime the walls.
Here is everything before primer. I really hate doing corners but after a lot of mudding and sanding this one came out pretty well, I think.
The raw drywall had to be primed, but I decided to also prime the rest since the dark orangey red was going to be a bit tough to cover.
One trick that I learned to get really smooth walls is to lightly sand a wall that was raw drywall after you prime it. The reason is that the sanded drywall compound is really smooth, but the drywall around it that has been sanded gets a little fuzzy. Below is a picture showing that before I primed. Once you prime the wall if you give it a light sanding it knocks down the rough texture from the fuzzy drywall and makes everything very smooth.
The final step was two coats of paint on the wall. I love the grey color with blue undertones of the Nimbus Gray walls. There is no natural light in the hallway so I kept the lights on to take the photos, but that makes it hard to get good pictures. I am going to have to do some experimenting to get better shots in the hallway.
Next up in here is to add crown and put down some hardwood flooring. Longer term I plan to replace the door molding to match the rest of the house (that's why I wasn't too careful with my cutting in) and add beadboard wainscoting. For now I am just happy that I have finished walls with paint!